You can find our backlights at http://retromodding.com
Required Parts:
![]()
Optional Parts:
Ffxiv mac client download for mac. Nintendo Game Boy mods and other customization products for vintage hand-held electronics. Find modifications for the Game Boy DMG, Game Boy Color, Game Boy Pocket, Game Boy Advance and SEGA Game Gear. Top modifications include Game Boy Backlight, Game Boy Color Backlight, Game Boy Advance Backlight, AGS-101 and IPS LCDs. Game Boy Bivert/hex mods. Sep 18, 2019 The Original Gameboy DMG backlight Mod. The backlight mod wasn’t difficult for me to complete. Although I’ve had many years of working on several electronics and soldering. I would rate it as an easy-medium level of difficulty. Lots of small parts, just bundle them together each layer you take off. A good rule of thumb is ALWAYS to test your mod before you put everything back together.
For disassembling your Game Boy, visit our guide here: How to Disassemble a Game Boy
Before you begin, assure you have a genuine ASM Density Backlight. Refer to the hologram on the back of the backlight panel and reference the photo above for authenticity. Many of the Density imitations on the market are notorious for overheating the Game Boy's power regulator, causing the case's plastic to melt.
Introduction:
The LCD is comprised of four main layers shown in 'Figure 1'.
Our goal is to remove the bottom polarized film (which will be replaced with our own piece) and the reflective foil. DO NOT remove the top layer of polarized film. If you mistakenly remove it, you will not be able to see any data on your LCD screen.
Dmg Gameboy Backlight Mod
The reflective foil is nontransparent, therefore it needs to be removed for the backlight to be visible. We remove the polarized film as well, because if we do not, there will be a considerable amount of glue residue left on it that is extremely difficult to remove. Furthermore, by using our own piece of polarized film we can 'invert' or 'bivert' the LCD.
Gameboy Dmg Backlight Mod 3
Before we begin, we recommend wearing rubber gloves to prevent getting fingerprints on the LCD. We also put a piece of plastic over the front of the LCD to prevent scratches, but this is optional.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
November 2020
Categories |